Internet Engineering Task Force (IETF) D. Farinacci
Request for Comments: 9735 lispers.net
Category: Standards Track L. Iannone, Ed.
ISSN: 2070-1721 Huawei
February 2025
Locator/ID Separation Protocol (LISP) Distinguished Name Encoding
Abstract
This document defines how to use the "Distinguished Name" Address Family Identifier (AFI)
17 "Distinguished Name" in the Locator/ID Separation Protocol (LISP).
LISP introduces two new numbering spaces: Endpoint Identifiers (EIDs)
and Routing Locators (RLOCs). Distinguished Names (DNs) can be used
in either Endpoint Identifier
(EID) records EID-Records or Routing Locator (RLOC) records RLOC-Records in LISP control messages to
convey additional information.
Status of This Memo
This is an Internet Standards Track document.
This document is a product of the Internet Engineering Task Force
(IETF). It represents the consensus of the IETF community. It has
received public review and has been approved for publication by the
Internet Engineering Steering Group (IESG). Further information on
Internet Standards is available in Section 2 of RFC 7841.
Information about the current status of this document, any errata,
and how to provide feedback on it may be obtained at
https://www.rfc-editor.org/info/rfc9735.
Copyright Notice
Copyright (c) 2025 IETF Trust and the persons identified as the
document authors. All rights reserved.
This document is subject to BCP 78 and the IETF Trust's Legal
Provisions Relating to IETF Documents
(https://trustee.ietf.org/license-info) in effect on the date of
publication of this document. Please review these documents
carefully, as they describe your rights and restrictions with respect
to this document. Code Components extracted from this document must
include Revised BSD License text as described in Section 4.e of the
Trust Legal Provisions and are provided without warranty as described
in the Revised BSD License.
Table of Contents
1. Introduction
2. Terminology
2.1. Definition
2.2. Requirements Language
3. Distinguished Name Format
4. Mapping System Mapping-System Lookups for Distinguished Name DN EIDs
5. Example Use Cases
6. Name-Collision Considerations
7. Security Considerations
8. IANA Considerations
9. Sample LISP Distinguished Name (DN) DN Deployment Experience
9.1. DNs to Advertise Specific Device Roles or Functions
9.2. DNs to Drive xTR Onboarding Procedures
9.3. DNs for NAT-Traversal
9.4. DNs for Self-Documenting RLOC Names
9.5. DNs used Used as EID Names
10. References
10.1. Normative References
10.2. Informative References
Acknowledgments
Authors' Addresses
1. Introduction
The
LISP architecture and protocols (see [RFC9300] ([RFC9300] and [RFC9301])
introduce introduces two new numbering spaces:
Endpoint Identifiers (EIDs) and Routing Locators (RLOCs). To provide
flexibility for current and future applications, these values can be
encoded in LISP control messages using a general syntax that includes
the Address Family Identifier (AFI).
The length of addresses encoded in EID EID-Records and RLOC records RLOC-Records can
easily be determined by the AFI field, as the size of the address is
implicit in its AFI value. For instance, for AFI = equal to 1, which
is "IP (IP version 4)", the address length is known to be 4 octets.
However, AFI 17 "Distinguished Name", is a variable-length value, so
the length cannot be determined solely from the AFI value 17
[IANA-ADDRESS-FAMILY-REGISTRY].
[ADDRESS-FAMILY]. This document defines a termination character, an
8-bit value of 0, to be used as a string terminator so the length can
be determined.
LISP Distinguished Names DNs are useful when encoded either in EID-
Records EID-Records or RLOC-records RLOC-
Records in LISP control messages. As EIDs, they can be registered in
the mapping system Mapping System to find resources, services, or simply be used as
a self-documenting feature that accompanies other address-specific
EIDs. As RLOCs, Distinguished Names, DNs, along with RLOC-specific addresses and
parameters, can be used as labels to identify equipment type,
location, or any self-documenting string a registering device desires
to convey.
The Distinguished Name field in this document has no relationship to
the similarly named field in the Public-Key Infrastructure using
X.509 (PKIX) specifications [RFC5280]. (e.g., [RFC5280]).
2. Terminology
2.1. Definition
Address Family Identifier (AFI): a term used to describe an address
encoding in a packet. An address family is currently defined for
IPv4 or IPv6 addresses. See [IANA-ADDRESS-FAMILY-REGISTRY] [ADDRESS-FAMILY] for details on other
types of information that can be AFI encoded.
2.2. Requirements Language
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
"SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and
"OPTIONAL" in this document are to be interpreted as described in
BCP 14 [RFC2119] [RFC8174] when, and only when, they appear in all
capitals, as shown here.
3. Distinguished Name Format
An AFI=17 Distinguished Name AFI 17 "Distinguished Name" is encoded as:
0 1 2 3
0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| AFI = 17 | NULL Terminated US-ASCII NULL-Terminated (0x00) ~
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ US-ASCII String |
~ |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
The variable-length string of characters are encoded as a NULL (0x00) NULL-
terminated (0x00) US-ASCII character set as defined in [RFC3629],
where UTF-8 has the characteristic of preserving the full US-ASCII
range. A NULL character MUST appear only once in the string and MUST
be at the end of the string.
When Distinguished Names DNs are encoded for EIDs, the EID Mask-Len length of the EIDs as they appear in EID-Records EID-
Records, for all LISP control messages [RFC9301] [RFC9301], is the length of
the string in bits (including the
terminating NULL NULL-terminated 0x00 octet).
Where Distinguished Names DNs are encoded anywhere else (i.e., nested in LISP Canonical
Address Format (LCAF) encodings [RFC8060]), an explicit length field
can be used to indicate the length of the ASCII string in octets.
The length field MUST include the NULL 0 octet. octet (0x00). The string MUST
still be NULL terminated. NULL-terminated (0x00). If a NULL 0 octet (0x00) appears
before the end of the octet field, i.e., the NULL octet (0x00)
appears before the last position in the octet fields, then the string
MAY be accepted and the octets after the NULL 0 octet (0x00) MUST NOT
be used as part of the octet string.
If the octet after the AFI field is the NULL 0 octet, octet (0x00), the string
is a NULL string and MUST be accepted. That is, an AFI=17 AFI 17
"Distinguished Name" encoded string MUST be at least 1 octet in
length.
4. Mapping System Mapping-System Lookups for Distinguished Name DN EIDs
Distinguished Name EID lookups
When performing DN-EID lookups, Map-Request messages MUST carry as an
EID Mask-Len length equal to the length of the name string. string in bits.
This instructs the mapping
system Mapping System to do either an exact-match or a
longest-match lookup.
If the Distinguished Name DN EID is registered with the same length as the length in a
Map-Request, the Map-Server (when configured for proxy Map-Replying)
returns an exact-match lookup with the same EID Mask-Len length. If
a less specific name is registered, then the Map-Server returns the
registered name with the registered EID Mask-
Len Mask-Len length.
For example, if the registered EID name is "ietf" with an EID Mask-
Len length of 40 bits (the length of the string "ietf" plus the null
length of the NULL octet is (0x00) makes 5 octets), and a Map-Request is
received for EID name "ietf.lisp" with an EID Mask-Len length of 80
bits, the Map-Server will return EID "ietf" with a length of 40 bits.
5. Example Use Cases
This section identifies three specific use-case examples for the
Distinguished Name DN
format: two are used for an EID encoding and one for an RLOC-record RLOC-Record
encoding. When storing public keys in the mapping
system, Mapping System, as in
[LISP-ECDSA], a well-known format for a public-key hash can be
encoded as a Distinguished Name. DN. When street-location-to-GPS-
coordinate street-location-to-GPS-coordinate mappings
exist in the mapping system, Mapping System, as in [LISP-GEO], the street location
can be a free-form UTF-8 ASCII representation (with whitespace
characters) encoded as a Distinguished Name. DN. An RLOC that describes an Ingress or
Egress Tunnel Router (xTR) behind a NAT device can be identified by
its router name, as in
[LISP-NET-NAT]. [LISPERS-NET-NAT]. In this case, Distinguished Name DN encoding
is used in NAT Info-Request messages after the EID-prefix field of
the message.
6. Name-Collision Considerations
When a Distinguished Name DN encoding is used to format an EID, the uniqueness and
allocation concerns are no different than registering IPv4 or IPv6
EIDs to the mapping system. Mapping System. See [RFC9301] for more details. Also,
the use cases documented in Section 5 of this specification provide
allocation recommendations for their specific uses.
It is RECOMMENDED that each use case register their Distinguished
Names DNs with a unique
Instance-ID. Any use cases that require different uses for Distinguished Names DNs
within an Instance-ID MUST define their own Instance-ID and syntax
structure for the name registered to the Mapping System. See the
encoding procedures in [LISP-VPN] for an example.
7. Security Considerations
Distinguished Names
DNs are used in mappings that are part of the LISP control plane and
may be encoded using LCAF; thus, the security considerations of
[RFC9301] and [RFC8060] apply.
8. IANA Considerations
This document has no IANA actions.
9. Sample LISP Distinguished Name (DN) DN Deployment Experience
Practical implementations of the LISP Distinguished Name
specification DN, defined in this document,
have been running in production networks for some time. The
following sections provide some examples of its usage and lessons
learned out of this experience.
9.1. DNs to Advertise Specific Device Roles or Functions
In a practical implementation of [LISP-EXT] on LISP deployments,
routers running as Proxy Egress Tunnel Routers (Proxy-ETRs) register
their role with the Mapping System in order to attract traffic
destined for external networks. Practical implementations of this
functionality make use of a Distinguished Name DN as an EID to identify the Proxy-ETR
role in a Map-Registration.
In this case, all Proxy-ETRs supporting this function register a
common Distinguished Name DN together with their own offered locator. The Mapping-System Mapping
System aggregates the locators received from all Proxy-
ETRs Proxy-ETRs as a
common locator-set that is associated with this DN EID. In this
scenario, the Distinguished Name DN serves as a common reference EID that can be
requested (or subscribed as per [RFC9437]) to dynamically gather this
Proxy-ETR list as specified in the LISP Site External Connectivity document.
document [LISP-EXT].
The use of a Distinguished Name DN here provides descriptive information about the role
being registered and allows the Mapping System to form locator-sets
associated with a specific role. These locator-sets can be
distributed on-demand based on using the shared DN as EID. It also
allows the network admin and the Mapping System to selectively choose
what roles and functions can be registered and distributed to the
rest of the participants in the network.
9.2. DNs to Drive xTR Onboarding Procedures
Following the LISP reliable transport [LISP-MAP], ETRs that plan to
switch to using reliable transport to hold registrations first need
to start with traditional UDP registrations. The UDP registration allows the
Map-Server to perform basic authentication of the ETR and to create
the necessary state to permit the reliable transport session to be
established (e.g., establish a passive open on TCP port 4342 and add
the ETR RLOC to the list allowed to establish a session).
In the basic implementation of this process, the ETRs need to wait
until local mappings are available and ready to be registered with
the Mapping System. Furthermore, when the mapping system Mapping System is
distributed, the ETR requires having one specific mapping ready to be
registered with each one of the relevant Map-Servers. This process
may delay the onboarding of ETRs with the Mapping System so that they
can switch to using reliable transport. This can also lead to
generating unnecessary signaling as a reaction to certain triggers
like local port flaps and device failures.
The use of dedicated name registrations allows driving this initial
ETR onboarding on the Mapping System as a deterministic process that
does not depend on the availability of other mappings. It also
provides more stability to the reliable transport session to survive
through transient events.
In practice, LISP deployments use dedicated Distinguished Names DNs that are registered
as soon as xTRs come online with all the necessary Map-Servers in the
Mapping System. The mapping with the dedicated DN together with the
RLOCs of each Egress Tunnel Router (ETR) in the locator-set is used
to drive the initial UDP registration and also to keep the reliable
transport state stable through network condition changes. On the
Map-Server, these DN registrations facilitate setting up the
necessary state to onboard new ETRs rapidly and in a more
deterministic manner.
9.3. DNs for NAT-Traversal
The open source
At the time of writing, the open-source lispers.net NAT-Traversal
implementation
[LISP-NET-NAT] [LISPERS-NET-NAT] has had 10 years of deployment experience using
Distinguished Names deployed DNs for documenting
xTRs versus Re-encapsulating Tunnel Routers (RTRs) as they appear in
a locator-set. locator-set for 10 years.
9.4. DNs for Self-Documenting RLOC Names
The open source
At the time of writing, the open-source lispers.net implementation
[LISPERS-NET-NAT] has had 10 years of self-
documenting self-documented RLOC names in production and
pilot environments. environments for 10 years. The RLOC name is encoded with the
RLOC address in Distinguished Name DN format.
9.5. DNs used Used as EID Names
The open source
At the time of writing, the open-source lispers.net implementation
[LISPERS-NET-NAT] has had 10 years of
deployment experience allowing deployed xTRs that are allowed to register EIDs
as Distinguished
Names. DNs for 10 years. The LISP Mapping System can be used as a DNS
proxy for Name-
to-EID-address Name-to-EID-address or Name-to-RLOC-address mappings. The
implementation also supports Name-to-Public-Key mappings to provide
key management features in [LISP-ECDSA].
10. References
10.1. Normative References
[IANA-ADDRESS-FAMILY-REGISTRY]
[ADDRESS-FAMILY]
IANA, "Address Family Numbers",
<https://www.iana.org/assignments/address-family-numbers>.
[RFC2119] Bradner, S., "Key words for use in RFCs to Indicate
Requirement Levels", BCP 14, RFC 2119,
DOI 10.17487/RFC2119, March 1997,
<https://www.rfc-editor.org/info/rfc2119>.
[RFC3629] Yergeau, F., "UTF-8, a transformation format of ISO
10646", STD 63, RFC 3629, DOI 10.17487/RFC3629, November
2003, <https://www.rfc-editor.org/info/rfc3629>.
[RFC8174] Leiba, B., "Ambiguity of Uppercase vs Lowercase in RFC
2119 Key Words", BCP 14, RFC 8174, DOI 10.17487/RFC8174,
May 2017, <https://www.rfc-editor.org/info/rfc8174>.
[RFC9300] Farinacci, D., Fuller, V., Meyer, D., Lewis, D., and A.
Cabellos, Ed., "The Locator/ID Separation Protocol
(LISP)", RFC 9300, DOI 10.17487/RFC9300, October 2022,
<https://www.rfc-editor.org/info/rfc9300>.
[RFC9301] Farinacci, D., Maino, F., Fuller, V., and A. Cabellos,
Ed., "Locator/ID Separation Protocol (LISP) Control
Plane", RFC 9301, DOI 10.17487/RFC9301, October 2022,
<https://www.rfc-editor.org/info/rfc9301>.
[RFC9437] Rodriguez-Natal, A., Ermagan, V., Cabellos, A., Barkai,
S., and M. Boucadair, "Publish/Subscribe Functionality for
the Locator/ID Separation Protocol (LISP)", RFC 9437,
DOI 10.17487/RFC9437, August 2023,
<https://www.rfc-editor.org/info/rfc9437>.
10.2. Informative References
[LISP-ECDSA]
Farinacci, D. and E. Nordmark, "LISP Control-Plane ECDSA
Authentication and Authorization", Work in Progress,
Internet-Draft, draft-ietf-lisp-ecdsa-auth-13, 18 August
2024, <https://datatracker.ietf.org/doc/html/draft-ietf-
lisp-ecdsa-auth-13>.
[LISP-EXT] Jain, P., Moreno, V., and S. Hooda, "LISP Site External
Connectivity", Work in Progress, Internet-Draft, draft-
ietf-lisp-site-external-connectivity-01, 24 September
2024, <https://datatracker.ietf.org/doc/html/draft-ietf-
lisp-site-external-connectivity-01>.
[LISP-GEO] Farinacci, D., "LISP Geo-Coordinate Use-Cases", Work in
Progress, Internet-Draft, draft-ietf-lisp-geo-09, 15
January 2025, <https://datatracker.ietf.org/doc/html/
draft-ietf-lisp-geo-09>.
[LISP-MAP] Venkatachalapathy, B., Portoles-Comeras, M., Lewis, D.,
Kouvelas, I., and C. Cassar, "LISP Map Server Reliable
Transport", Work in Progress, Internet-Draft, draft-ietf-
lisp-map-server-reliable-transport-05, 4 November 2024,
<https://datatracker.ietf.org/doc/html/draft-ietf-lisp-
map-server-reliable-transport-05>.
[LISP-NET-NAT]
Farinacci, D., "lispers.net LISP NAT-Traversal
Implementation Report", Work in Progress, Internet-Draft,
draft-farinacci-lisp-lispers-net-nat-09, 8 December 2024,
<https://datatracker.ietf.org/doc/html/draft-farinacci-
lisp-lispers-net-nat-09>.
[LISP-VPN] Moreno, V. and D. Farinacci, "LISP Virtual Private
Networks (VPNs)", Work in Progress, Internet-Draft, draft-
ietf-lisp-vpn-12, 19 September 2023,
<https://datatracker.ietf.org/doc/html/draft-ietf-lisp-
vpn-12>.
[LISPERS-NET-NAT]
Farinacci, D., "lispers.net LISP NAT-Traversal
Implementation Report", Work in Progress, Internet-Draft,
draft-farinacci-lisp-lispers-net-nat-09, 8 December 2024,
<https://datatracker.ietf.org/doc/html/draft-farinacci-
lisp-lispers-net-nat-09>.
[RFC5280] Cooper, D., Santesson, S., Farrell, S., Boeyen, S.,
Housley, R., and W. Polk, "Internet X.509 Public Key
Infrastructure Certificate and Certificate Revocation List
(CRL) Profile", RFC 5280, DOI 10.17487/RFC5280, May 2008,
<https://www.rfc-editor.org/info/rfc5280>.
[RFC8060] Farinacci, D., Meyer, D., and J. Snijders, "LISP Canonical
Address Format (LCAF)", RFC 8060, DOI 10.17487/RFC8060,
February 2017, <https://www.rfc-editor.org/info/rfc8060>.
Acknowledgments
The authors would like to thank the LISP WG for their review and
acceptance of this document. A special thank you goes to Marc
Portoles for moving this document through the process and providing
deployment-experience samples.
Authors' Addresses
Dino Farinacci
lispers.net
San Jose, CA
United States of America
Email: farinacci@gmail.com
Luigi Iannone (editor)
Huawei Technologies France S.A.S.U.
18, Quai du Point du Jour
92100 Boulogne-Billancourt
France
Email: luigi.iannone@huawei.com